冒险村物语
英雄无敌3塔防
驾考家园手游

TP-Link WR703N路由器刷机教程

2015-06-17

首先我们要了解我们刷的路由器是啥芯片，这个TL-WR703N的硬件条件如下：

TP-Link WR703N
The TP-Link router is a small wifi hotspot, with a USB port that make highly customizable. Moreover, this unit cost less than 100RMB on your favorite online shop!
Specifications :Atheros AR7240 CPU (400Mhz)Atheros AR9331 Chipset (integrated wireless)802.11 b/g/n 150Mbps (130Mbps real)wireless power output 20dBm – 100mW4 MB flash memory32 MB RAMTiny form factor: 5.7cm x 5.7cm

1x LAN port1x USB 2.0 port1x mini USB port, for power1x LED (customisable once OpenWRT is installed)

芯片是Atheros AR7240 CPU，400MHz的主频，很不错了哦~100块钱很划算(不过要小心被刷成砖头哦。。)

为了能刷机，首先要下载最新的703N的openwrt版本文件：http://downloads.openwrt.org/snapshots/trunk/ar71xx/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin

文件大小为：3.75M，很容易就下载好了

接下来就要准备好一根网线和一根迷你usb线(电源线)，然后接上电脑，这个接线不用描述了吧，所有口都是唯一的，不对是插不进去…

接下来设置已连接电脑或者笔记本的IP为192.168.1.100,子网掩码255.255.255.0,默认网管192.168.1.1

(其实就用DHCP就好了。。